服务器评测
笔记本安装SUSE10.3，显卡为N卡Nvidia GeForce Go 7300,如下面英文安装方法安装openSUSE 10.3 -AMD64，按提示完成安装
openSUSE 10.3-AMD64
It is recommended to use YaST for installation of the NVIDIA
driver. There are several reasons for this. First, it’s
simple. Second, and this is the most important one, you won’t need to
recompile the nvidia kernel module after a kernel update.
Update your Kernel via YOU (YaST Online Update). Use
YaST -> Software -> Installation Source -> Add
Protocol: HTTP
Server Name: : download.nvidia.com
Directory on Server: /opensuse/10.3
to add the NVIDIA ftp server as additional installation source.
Now use
YaST -> Software -> Software Management
to install the NVIDIA driver. Select the following packages:
x11-video-nvidiaG01
nvidia-gfxG01-kmp-default
1-Click-install: http://opensuse-community.org/nvidia.ymp
If you own one of the following NVIDIA graphics chips
0x0110 GeForce2 MX/MX 400
0x0111 GeForce2 MX 100/200
0x0112 GeForce2 Go
0x0113 Quadro2 MXR/EX/Go
0x0170 GeForce4 MX 460
0x0171 GeForce4 MX 440
0x0172 GeForce4 MX 420
0x0173 GeForce4 MX 440-SE
0x0174 GeForce4 440 Go
0x0175 GeForce4 420 Go
0x0176 GeForce4 420 Go 32M
0x0177 GeForce4 460 Go
0x0178 Quadro4 550 XGL
0x0179 GeForce4 440 Go 64M
0x017A Quadro NVS
0x017C Quadro4 500 GoGL
0x017D GeForce4 410 Go 16M
0x0181 GeForce4 MX 440 with AGP8X
0x0182 GeForce4 MX 440SE with AGP8X
0x0183 GeForce4 MX 420 with AGP8X
0x0185 GeForce4 MX 4000
0x0188 Quadro4 580 XGL
0x018A Quadro NVS 280 SD
0x018B Quadro4 380 XGL
0x018C Quadro NVS 50 PCI
0x01A0 GeForce2 Integrated GPU
0x01F0 GeForce4 MX Integrated GPU
0x0200 GeForce3
0x0201 GeForce3 Ti 200
0x0202 GeForce3 Ti 500
0x0203 Quadro DCC
0x0250 GeForce4 Ti 4600
0x0251 GeForce4 Ti 4400
0x0253 GeForce4 Ti 4200
0x0258 Quadro4 900 XGL
0x0259 Quadro4 750 XGL
0x025B Quadro4 700 XGL
0x0280 GeForce4 Ti 4800
0x0281 GeForce4 Ti 4200 with AGP8X
0x0282 GeForce4 Ti 4800 SE
0x0286 GeForce4 4200 Go
0x0288 Quadro4 980 XGL
0x0289 Quadro4 780 XGL
0x028C Quadro4 700 GoGL
select instead the packages:
x11-video-nvidia
nvidia-gfx-kmp-default
1-Click-install: http://opensuse-community.org/nvidia-legacy.ymp
Use “sax2 -r” for X.Org configuration.
People who aren’t afraid of recompiling the nvidia kernel module or
even reinstalling the nvidia driver each time the kernel has been
updated and want or need to use the latest and greatest nvidia driver
can use the following steps 1-3. The others should use the
instructions above using YaST and skip the steps below.
1) Kernel sources must be installed and configured. Usually this means
installing the ‘kernel-source’, ‘make’ and ‘gcc’ packages with YaST2.
2) Use the nvidia installer for 100.14.19.
sh NVIDIA-Linux-x86_64-100.14.19-pkg2.run -q
3) Configure X.Org with
sax2 -r -m 0=nvidia (0 is a digit, not a letter!)
NOTE: There is no need to try to enable 3D support. It’s already
enabled, when the nvidia driver is running.
IMPORTANT: You need to recompile and install the nvidia kernel module
after each kernel update.
sh NVIDIA-Linux-x86_64-100.14.19-pkg2.run -K
由于是一键安装所以方法比较简单，也不易出错。按提示重起系统。
