感谢支持
我们一直在努力

当ThinkPad装完Ubuntu 10.04/Mint 9后

蛋疼得重Ubuntu还到了Mint。但是Mint给了我一个不小的惊喜。开机比Ubuntu快。开启无线的情况下在账户登录输入密码的时候没有出现停顿。整合后的系统设置。


之前虽然知道是基于Ubuntu的,但是装之前还是疑虑能不能用Ubuntu的ppa。后来发现完全不用担心。因为Mint直接是把Ubuntu的源加到了第三方的源中。然后又家了自己软件的一个源。也就是说给Ubuntu加了个壳。


好了说了这么多来说说我针对thinkpad x200做的一些配置:



”””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””


” hdaps(给硬盘加一个安全气囊)


”””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””


这 个东西很好,thinkpad常拿这个技术来做广告。当硬盘感受要剧烈晃动时,www.linuxidc.com立即停止转动来减少伤害。


在 Ubuntu10.04中出现了 tp-smapi-dkms这个包给我们搞定tp-smapi模块的安装带来了很大的方便。


sudo rm /lib/modules/$KVER/kernel/drivers/hwmon/hdaps.ko


sudo apt-get install tp-smapi-dkms hdapsd?


sudo gedit /etc/modules


加入:


thinkpad_ec


tp_smapi


sudo gedit /etc/modprobe.d/local.conf


加入:


enable thinkpad_ec
options thinkpad_ec force_io=1


option to correctly set tilting through hdaps sensor
options hdaps invert=1


hdaps


”””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””


” 小红点


”””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””


sudo apt-get install gpointing-device-settings


打开gpointing- device-settings如图设置:


当ThinkPad装完Ubuntu 10.04/Mint 9后 

还有一个问题是现在的小红点移动感觉木木的,我们来给它加兴奋剂:


sudo vi /etc/rc.local


游標速度,可調整數值。大為快,小為幔
echo -n 120 > /sys/devices/platform/i8042/serio1/speed


靈敏度,最高應為 255
echo -n 250 > /sys/devices/platform/i8042/serio1/sensitivity


按小紅點為選取,1 為啟用,0 為關閉。
echo -n 1 > /sys/devices/platform/i8042/serio1/press_to_select


exit 0


”””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””


“ 风扇


”””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””


sudo apt-get install thinkfan


”””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””


“ 静音键


”””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””


sudo vi /etc/default/grub


将GRUB_CMDLINE_LINUX=””改成


GRUB_CMDLINE_LINUX=”acpi_osi=”Linux””


”””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””


“ 充电阀值


”””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””””


$ sudo echo 50 > /sys/devices/platform/smapi/BAT0/start_charge_thresh


echo 90 > /sys/devices/platform/smapi/BAT0/stop_charge_thresh

赞(0) 打赏
转载请注明出处:服务器评测 » 当ThinkPad装完Ubuntu 10.04/Mint 9后
分享到: 更多 (0)

听说打赏我的人,都进福布斯排行榜啦!

支付宝扫一扫打赏

微信扫一扫打赏