服务器评测
这篇应该就是最新(2012/3/3)的关于在Ubuntu 11.10下安装配置OpenCV 2.3.1了向导了。写的很详细。
我用这个向导配置了，但是有几个问题，解决办法贴在后面。
A Comprehensive Guide to Installing and Configuring OpenCV 2.3.1 on Ubuntu
This guide describes how to install and configure OpenCV 2.3.1 and its dependencies on Ubuntu. It is a compilation of my notes recorded during dozens of OpenCV installs on several different systems. This guide differs from other OpenCV guides in the following ways:
This guide is comprehensive: you can start with a clean Ubuntu and successfully install OpenCV 2.3.1 by following this guide.
This guide is for OpenCV 2.3.1. The other guides I found used previous versions of OpenCV.
This guide includes all of the steps you need to use a webcam with OpenCV.
Credit and thanks go to FakeOutdoorsman and Sebastian Montabone for their excellent posts, upon which several of the steps in this guide are based.
If you need help troubleshooting OpenCV installation problems, see the companion guide “A Comprehensive OpenCV Installation Troubleshooting Guide.”
The Installation Procedure
To install and configure OpenCV 2.3.1, complete the following steps.
Remove any installed versions of ffmpeg and x264 by entering the following command:
sudo apt-get remove ffmpeg x264 libx264-dev
Get all the dependencies for x264 and ffmpeg by entering the following commands:
sudo apt-get update
sudo apt-get install build-essential checkinstall git cmake libfaac-dev libjack-jackd2-dev libmp3lame-dev libopencore-amrnb-dev libopencore-amrwb-dev libsdl1.2-dev libtheora-dev libva-dev libvdpau-dev libvorbis-dev libx11-dev libxfixes-dev libxvidcore-dev texi2html yasm zlib1g-dev
Download and install gstreamer by entering the following command:
sudo apt-get install libgstreamer0.10-0 libgstreamer0.10-dev gstreamer0.10-tools gstreamer0.10-plugins-base libgstreamer-plugins-base0.10-dev gstreamer0.10-plugins-good gstreamer0.10-plugins-ugly gstreamer0.10-plugins-bad gstreamer0.10-ffmpeg
Download and install install x264.
Download a recent stable snapshot of x264 from ftp://ftp.videolan.org/pub/videolan/x264/snapshots/. The exact version does not seem to matter. To write this guide, I used version x264-snapshot-20110808-2245-stable.tar.bz2, but I have used previous versions too.
Configure and build the x264 libraries by entering the following commands:
./configure –enable-static
make
sudo make install
Download and install install ffmpeg.
Download ffmpeg version 0.8.x from http://ffmpeg.org/download.html. Note: Versions of OpenCV prior to 2.3.1 require ffmpeg 0.7.x.
Configure and build ffmpeg by entering the following commands in a terminal:
./configure –enable-gpl –enable-libfaac –enable-libmp3lame –enable-libopencore-amrnb –enable-libopencore-amrwb –enable-libtheora –enable-libvorbis –enable-libx264 –enable-libxvid –enable-nonfree –enable-postproc –enable-version3 –enable-x11grab
make
sudo make install
Download and install gtk by entering the following command:
sudo apt-get install libgtk2.0-0 libgtk2.0-dev
Download and install libjpeg by entering the following command:
sudo apt-get install libjpeg62 libjpeg62-dev
Download and install install v4l (video for linux).
Download v4l-utils-0.8.5.tar.bz2 from http://www.linuxtv.org/downloads/v4l-utils/
Build v4l by entering the following commands in a terminal:
make
sudo make install
Download and install install OpenCV.
Download OpenCV version 2.3.1 from http://sourceforge.net/projects/opencvlibrary/files/
Use the following command to untar the source files
tar xvf OpenCV-2.3.1.tar.bz2
cd OpenCV-2.3.1/
mkdir build
cd build
cmake ..
Check that the output of cmake includes the following text:
found gstreamer-base-0.10
GTK+ 2.x: YES
FFMPEG: YES
GStreamer: YES
V4L/V4L2: Using libv4l
Note: In versions of OpenCV prior to 2.3.1, the binary digit 1 was used instead of the word YES, like this: FFMPEG: 1.
Run make
Run sudo make install
Configure Linux.
Tell linux where the shared libraries for OpenCV are located by entering the following shell command:
export LD_LIBRARY_PATH=/usr/local/lib
Add the command to your .bashrc file so that you don’t have to enter every time your start a new terminal.
Alternatively, you can configure the system wide library search path. Using your favorite editor, add a single line containing the text /usr/local/lib to the end of a file named /etc/ld.so.conf.d/opencv.conf. Using vi, for example, enter the following commands:
sudo vi /etc/ld.so.conf.d/opencv.conf
G
o
/usr/local/lib
<Esc>
:wq!
Using your favorite editor, add the following two lines to the end of /etc/bash.bashrc:
PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/local/lib/pkgconfig
export PKG_CONFIG_PATH
Reboot.
After completing the previous steps, your system should be ready to compile code that uses the OpenCV libraries. The following example shows one way to compile code for OpenCV:
g++ `pkg-config opencv –cflags` `pkg-config opencv –libs` my_code.cpp -o my_code
———————————–分割线———————————-
1.我make完opencv的时候，老是提示：
make[2]: *** [lib/libopencv_highgui.so.2.3.1] Error 1
make[1]: *** [modules/highgui/CMakeFiles/opencv_highgui.dir/all] Error 2
看原向导下面的评论，说./configure ffmpeg和x264的时候，除了向导里面提到的那些–enable-xxx之类的，还要加上–enable-pic –enable-shared。据说就能解决了，但是我的还是解决不了。
我问题出在ffmpeg上面，按照它的方法直接从ppa上git安装文件的话是不行的，因为这样git过来的ffmpeg版本太高了，而Ubuntu 11.10跟opencv2.3.1貌似只要0.8.x版本的。你可以官网上自己下压缩文件，ffmpeg-0.8.10.tar.bz2 下载：
免费下载地址在 http://linux.linuxidc.com/
用户名与密码都是www.linuxidc.com
具体下载目录在 /2012年资料/3月/3/Ubuntu 11.10下安装配置OpenCV 2.3.1/
再解压，按照它的方法来。
2.假如你装错了ffmpeg，想卸载的时候，可能会遇到因为配置文件没删干净卸载不了的问题，这个按照下面的方法来：
在终端中执行 sudo synaptic，以便启动 Synaptic 包管理工具。
点击 Synaptic 右下角的 Status 按钮进行切换。
现在，你应该能够在 Synaptic 的左边看到 Not installed (residual config)。选择它即可在右边看到包含有残余配置文件的包，你可以在此选择删除该包。
3.向导的第十步：Configure Linux 的第一步，注意G o应该是vi的指令，要是你用vim的话，是不需要G o的。直接按i进入编辑模式，加入/usr/local/lib就可以了。
