Mono和MonoDevelop源码编译安装

之所以用源码编译的方式安装mono和monodevelop，是因为通过yum安装的mono不是最新版本，而且monodevelop不能建 asp.net MVC3的工程。

而且通过源码安装，可以进一步了解mono的各个项目之间的关系。

我用的Fedora16系统

下载mono的最新源码，github上的源码编译时总是报找不到 gmcs.exe的错误。

我是在mono的官网上下的最新源码，地址：https://wrench.mono-project.com/Wrench/index.aspx?show_all=true

我下的是mono-2.11.3版

    # tar jxvf mono-2.11.3.tar.bz2

    # cd mono-2.11.3

    # ./autogen.sh –prefix=/usr/local

    # make

    # make install

需要注意的是用root用户来安装，否则有错误。

monodevelop的源码编译安装相当曲折，搞了好几天。

有几点需要注意：

1. 在monodevelop的官网上下最新源码，否则在./configure时会有找不到文件的错。
   
2. 在安装monodevelop之前，要先安装一些依赖的包。（mono-addins，gtk-sharp，libglade2，gnome-sharp-2.0）
   
3. 安装完后，需要设置LD_LIBRARY_PATH这个环境变量
   
4. 用root用户来安装

安装monodevelop之前，按顺序安装一些依赖包：

(gtk-sharp  –> mono-addins –> libglade2–> gnome-sharp-2.0)

这些包在安装时也会遇到各种问题，下面是我安装时遇到的各种问题及解决方法，供参考。

以上的安装顺序是我总结出来的，没有试验过。

我安装时并不知道上面的安装顺序，是直接安装monodevelop，然后遇到问题再解决的。我的安装顺序如下：

1) 和mono同样的网址下载monodevelop的最新代码。

    # tar jxvf monodevelop-3.1.0.tar.bz2

    # cd monodevelop-3.1.0

    # ./configure –prefix=`pkg-config –variable=prefix mono`

此时报了一个错误如下：找不到 UNMANAGED_DEPENDENCIES_MONO

====================================================================

[root@localhost monodevelop-3.1.0]# ./configure –prefix=`pkg-config –variable=prefix mono`

checking for a BSD-compatible install… /usr/bin/install -c

checking whether build environment is sane… yes

checking for a thread-safe mkdir -p… /bin/mkdir -p

checking for gawk… gawk

checking whether make sets $(MAKE)… yes

checking how to create a ustar tar archive… gnutar

checking whether to enable maintainer-specific portions of Makefiles… no

checking for mono… /usr/local/bin/mono

checking for gmcs… /usr/local/bin/gmcs

checking for update-mime-database… /usr/bin/update-mime-database

checking for pkg-config… /usr/bin/pkg-config

checking for msgfmt… /usr/bin/msgfmt

checking for msgmerge… /usr/bin/msgmerge

checking pkg-config is at least version 0.9.0… yes

checking for UNMANAGED_DEPENDENCIES_MONO… no

configure: error: Please install mono version 2.8 or later to install MonoDevelop.

Please see http://www.mono-project.org/ to download latest mono sources or packages

====================================================================

通过以下命令修复此错误：

# export PKG_CONFIG_PATH=/usr/lib/pkgconfig:/usr/local/lib/pkgconfig

再次执行：

# ./configure –prefix=`pkg-config –variable=prefix mono`

此时报了一个错误如下：找不到 mono-addins

====================================================================

checking for UNMANAGED_DEPENDENCIES_MONO… yes

checking for mono… /usr/local/bin/mono

checking for dmcs… /usr/local/bin/dmcs

checking for MONO_ADDINS… no

configure: error: Package requirements (mono-addins >= 0.6) were not met:

No package ‘mono-addins’ found

Consider adjusting the PKG_CONFIG_PATH environment variable if you

installed software in a non-standard prefix.

Alternatively, you may set the environment variables MONO_ADDINS_CFLAGS

and MONO_ADDINS_LIBS to avoid the need to call pkg-config.

See the pkg-config man page for more details.

====================================================================

下载mono-addins并安装，
下载地址： http://download.mono-project.com/sources/mono-addins/

    # tar jxvf mono-addins-0.6.2.tar.bz2

    # cd mono-addins-0.6.2

    # ./configure –prefix=/usr/local

此时报了一个错误如下：找不到 gtk-sharp-2.0

====================================================================

checking for a BSD-compatible install… /usr/bin/install -c

checking whether build environment is sane… yes

checking for a thread-safe mkdir -p… /bin/mkdir -p

checking for gawk… gawk

checking whether make sets $(MAKE)… yes

checking how to create a ustar tar archive… gnutar

checking whether to enable maintainer-specific portions of Makefiles… no

checking for pkg-config… /usr/bin/pkg-config

checking for a BSD-compatible install… /usr/bin/install -c

checking for gmcs… /usr/local/bin/gmcs

checking for gacutil… /usr/local/bin/gacutil

checking for al… /usr/local/bin/al

checking pkg-config is at least version 0.9.0… yes

checking for GTK_SHARP_20… configure: error: Package requirements (gtk-sharp-2.0) were not met:

No package ‘gtk-sharp-2.0’ found

Consider adjusting the PKG_CONFIG_PATH environment variable if you

installed software in a non-standard prefix.

Alternatively, you may set the environment variables GTK_SHARP_20_CFLAGS

and GTK_SHARP_20_LIBS to avoid the need to call pkg-config.

See the pkg-config man page for more details.

====================================================================

下载gtk-sharp并安装，
下载地址： http://download.mono-project.com/sources/gtk-sharp212/

    # tar jxvf gtk-sharp-2.12.11.tar.bz2

    # cd gtk-sharp-2.12.11

    # ./configure –prefix=/usr/local

    # make

    # make install

gtk-sharp安装成功后，接着安装mono-addins

    # cd ../mono-addins-0.6.2

    # ./configure –prefix=/usr/local

    # make

    # make install

mono-addins安装成功后，接着安装monodevelop   

    # cd ../monodevelop-3.1.0

    # ./configure –prefix=`pkg-config –variable=prefix mono`

   
此时报了一个错误如下：找不到 glade-sharp-2.0

====================================================================

[root@localhost monodevelop-3.1.0]# ./configure –prefix=`pkg-config –variable=prefix mono`

checking for a BSD-compatible install… /usr/bin/install -c

checking whether build environment is sane… yes

checking for a thread-safe mkdir -p… /bin/mkdir -p

checking for gawk… gawk

checking whether make sets $(MAKE)… yes

checking how to create a ustar tar archive… gnutar

checking whether to enable maintainer-specific portions of Makefiles… no

checking for mono… /usr/local/bin/mono

checking for gmcs… /usr/local/bin/gmcs

checking for update-mime-database… /usr/bin/update-mime-database

checking for pkg-config… /usr/bin/pkg-config

checking for msgfmt… /usr/bin/msgfmt

checking for msgmerge… /usr/bin/msgmerge

checking pkg-config is at least version 0.9.0… yes

checking for UNMANAGED_DEPENDENCIES_MONO… yes

checking for mono… /usr/local/bin/mono

checking for dmcs… /usr/local/bin/dmcs

checking for MONO_ADDINS… yes

checking for MONO_ADDINS_SETUP… yes

checking for MONO_ADDINS_GUI… yes

checking for GLIB_SHARP… yes

checking for GTK_SHARP… yes

checking for GLADE_SHARP… no

configure: error: Package requirements (glade-sharp-2.0 >= 2.12.8) were not met:

No package ‘glade-sharp-2.0’ found

Consider adjusting the PKG_CONFIG_PATH environment variable if you

installed software in a non-standard prefix.

Alternatively, you may set the environment variables GLADE_SHARP_CFLAGS

and GLADE_SHARP_LIBS to avoid the need to call pkg-config.

See the pkg-config man page for more details.

====================================================================

我不知道glade-sharp是什么包，先安装了libgdiplus

下载libgdiplus并安装，
下载地址： http://download.mono-project.com/sources/libgdiplus/

    # tar jxvf libgdiplus-2.10.9.tar.bz2

    # cd libgdiplus-2.10.9

    # ./configure –prefix=/usr/local

    # make

make时报了一个错误如下：

====================================================================

/usr/lib64/libglib-2.0.so.0: could not read symbols: Invalid operation

collect2: error: ld returned 1 exit status

make[2]: *** [testgdi] Error 1

make[2]: Leaving directory `/usr/local/src/libgdiplus-2.10.9/tests‘

make[1]: *** [all-recursive] Error 1

make[1]: Leaving directory `/usr/local/src/libgdiplus-2.10.9′

make: *** [all] Error 2

====================================================================

解决办法如下：
1. 运行./configure –prefix=/usr/local 之后，编辑 tests/Makefile 文件
2. 在Makefile文件130行位置，将   LIBS = -lpthread -lfontconfig
                            改为 LIBS = -lpthread -lfontconfig -lglib-2.0 -lX11
3. 再次运行 make 即可

    # make

    # make install

接着安装monodevelop  

    # cd ../monodevelop-3.1.0

    # ./configure –prefix=`pkg-config –variable=prefix mono`

仍然是错误：找不到 glade-sharp-2.0
利用yum 安装libglade2-devel，mono源码中没找到这个包

    # yum search libglade2

    # yum install libglade2-devel.x86_64

知道这个包的名称，也可以找相应的rpm来安装。

安装完libglade2后，重新安装 gtk-sharp2，安装方法上面已有。
接着，再次尝试安装 monodevelop：

    # ./configure –prefix=`pkg-config –variable=prefix mono`

此时报了一个错误如下：未安装gnome-sharp-2.0

====================================================================

[root@localhost monodevelop-3.1.0]# ./configure –prefix=`pkg-config –variable=prefix mono`

checking for a BSD-compatible install… /usr/bin/install -c

checking whether build environment is sane… yes

checking for a thread-safe mkdir -p… /bin/mkdir -p

checking for gawk… gawk

checking whether make sets $(MAKE)… yes

checking how to create a ustar tar archive… gnutar

checking whether to enable maintainer-specific portions of Makefiles… no

checking for mono… /usr/local/bin/mono

checking for gmcs… /usr/local/bin/gmcs

checking for update-mime-database… /usr/bin/update-mime-database

checking for pkg-config… /usr/bin/pkg-config

checking for msgfmt… /usr/bin/msgfmt

checking for msgmerge… /usr/bin/msgmerge

checking pkg-config is at least version 0.9.0… yes

checking for UNMANAGED_DEPENDENCIES_MONO… yes

checking for mono… /usr/local/bin/mono

checking for dmcs… /usr/local/bin/dmcs

checking for MONO_ADDINS… yes

checking for MONO_ADDINS_SETUP… yes

checking for MONO_ADDINS_GUI… yes

checking for GLIB_SHARP… yes

checking for GTK_SHARP… yes

checking for GLADE_SHARP… yes

checking for MONODOC… yes

checking for GNOME_SHARP… no

checking for GNOME_VFS_SHARP… no

checking for GCONF_SHARP… no

configure: error: Cannot enable GNOME platform without gnome-sharp-2.0

====================================================================

下载 gnome-sharp-2.0 并安装
下载地址： http://download.mono-project.com/sources/gnome-sharp220/

    # tar jxvf gnome-sharp-2.20.1.tar.bz2

    # cd gnome-sharp-2.20.1

    # ./configure –prefix=/usr/local

虽然没有报错，但是提示缺少3个assmely: art-sharp.dll,gnomevfs-sharp.dll,gnome-sharp.dll

====================================================================

Configuration summary

   * Installation prefix = /usr/local

   * C# compiler: /usr/local/bin/mcs  -define:GTK_SHARP_2_6 -define:GTK_SHARP_2_8 -define:GNOME_SHARP_2_16 -define:GNOME_SHARP_2_20

   Optional assemblies included in the build:

      * art-sharp.dll: no

      * gnomevfs-sharp.dll: no

      * gnome-sharp.dll: no

      NOTE: if any of the above say ‘no’ you may install the

            corresponding development packages for them, rerun

            autogen.sh to include them in the build.

            gnome-sharp.dll requires libgnomecanvas, libgnome,

            libgnomeui, libgnomeprint, libgnomeprintui, and

            libpanelapplet.

====================================================================

下面的两个dll对应如下库：（我是通过 yum找到的）
art-sharp.dll             : libart_lgpl-devel
gnomevfs-sharp.dll: gnome-vfs2-devel
最后一个根据上面的提示，（对应如下库）
gnome-sharp.dll   : libgnomecanvas, libgnome,
            libgnomeui, libgnomeprint, libgnomeprintui, and
            libpanelapplet(即gnome-panel-devel)

    # make

make 后，报出如下错误：

====================================================================

error CS0006: Metadata file `Mono.GetOptions.dll’ could not be found

====================================================================

经过调查，
1.  原来是gnome-sharp版本太旧的原因，
    前面用的gnome-sharp-2.20.*用了Mono.GetOptions，更新至gnome-sharp-2.24.*
2.  注释掉gnome-sharp-2.24.1/sample/gnomevfs/Makefile中关于 Mono.GetOptions的内容

下载地址：http://download.mono-project.com/sources/gnome-sharp2/

    # tar jxvf gnome-sharp-2.24.1.tar.bz2

    # cd gnome-sharp-2.24.0

    # ./configure –prefix=/usr/local

    # make

    # make install

接着，再次尝试安装 monodevelop：

    # ./configure –prefix=`pkg-config –variable=prefix mono`

此时会产生一些找不到 tests/UnitTests/Makefile.in 之类的错误。
经过调查，似乎是monodevelop 版本的问题，在monodevelop官网上下载最新的代码，
然后重新安装，终于安装成功。官网上最新版是3.0.3.4

    # tar jxvf monodevelop-3.0.3.4.tar.bz2

    # cd ../monodevelop-3.0.3.4

    # ./configure –prefix=`pkg-config –variable=prefix mono`

    # make

    # make install

安装完后，monodevep却无法启动，错误如下：

====================================================================

System.TypeInitializationException: An exception was thrown by the type initializer for Mono.Unix.Native.Syscall —> System.DllNotFoundException: libMonoPosixHelper.so

  at (wrapper managed-to-native) Mono.Unix.Native.Syscall:_L_ctermid ()

  at Mono.Unix.Native.Syscall..cctor () [0x00032] in /home/wangyb/downloads/mono/mono-2.11.3/mcs/class/Mono.Posix/Mono.Unix.Native/Syscall.cs:2599 

  — End of inner exception stack trace —

  at MonoDevelop.Core.LoggingService.RedirectOutputToFileUnix (FilePath logDirectory, System.String logName) [0x0001f] in /home/wangyb/downloads/mono/monodevelop-3.0.3.4/src/core/MonoDevelop.Core/MonoDevelop.Core/LoggingService.cs:177 

  at MonoDevelop.Core.LoggingService.RedirectOutputToLogFile () [0x00046] in /home/wangyb/downloads/mono/monodevelop-3.0.3.4/src/core/MonoDevelop.Core/MonoDevelop.Core/LoggingService.cs:140 

FATAL ERROR [2012-07-29 07:59:49Z]: MonoDevelop failed to start. Some of the assemblies required to run MonoDevelop (for example gtk-sharp, gnome-sharp or gtkhtml-sharp) may not be properly installed in the GAC.

System.TypeInitializationException: An exception was thrown by the type initializer for Gtk.Application —> System.DllNotFoundException: glibsharpglue-2

  at (wrapper managed-to-native) GLib.Thread:glibsharp_g_thread_supported ()

  at GLib.Thread.get_Supported () [0x00000] in <filename unknown>:0 

  at Gtk.Application..cctor () [0x00000] in <filename unknown>:0 

  — End of inner exception stack trace —

  at MonoDevelop.Ide.IdeStartup.Run (MonoDevelop.Ide.MonoDevelopOptions options) [0x00085] in /home/wangyb/downloads/mono/monodevelop-3.0.3.4/src/core/MonoDevelop.Ide/MonoDevelop.Ide/IdeStartup.cs:95 

  at MonoDevelop.Ide.IdeStartup.Main (System.String[] args) [0x00058] in /home/wangyb/downloads/mono/monodevelop-3.0.3.4/src/core/MonoDevelop.Ide/MonoDevelop.Ide/IdeStartup.cs:503 

====================================================================

将LD_LIBRARY_PATH加入到启动的配置文件中，即 ～/.bashrc
内容如下：

    # add mono LD_LIBRARY_PATH

    export LD_LIBRARY_PATH=/usr/local/lib

终于启动成功，也有 aspnet-mvc3的工程了 ^_^

记录下安装过程的错误，也是方便以后遇到相同的错误可以知道怎么解决。

大家在安装过程中如果有什么新的问题，欢迎交流。