感谢支持
我们一直在努力

CentOS 7上Systemtap的安装

按照SystemTap Beginners Guide的Installation and Setup部分安装了SystemTap,但是在安装过程中还是出现问题,在这里记录下解决方法。

环境

  • Linux发行版本:CentOS Linux release 7.4.1708 (Core)
  • 内核版本:3.10.0-693.2.2.el7.x86_64
  • uname -a: Linux hostname 3.10.0-693.2.2.el7.x86_64 #1 SMP Tue Sep 12 22:26:13 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux

安装
安装SystemTap

先安装如下两个RPM包:

  • systemtap
  • systemtap-runtime

以root运行如下命令:

# yum install systemtap systemtap-runtime

在运行SystemTap之间,还需要装必要的内核信息包。在现代系统上,可以运行如下stap-prep来安装这些包,如下:

# stap-prep
Need to install the following packages:
kernel-devel-3.10.0-693.2.2.el7.x86_64
kernel-debuginfo-3.10.0-693.2.2.el7.x86_64
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
No package kernel-devel-3.10.0-693.2.2.el7.x86_64 available.
No package kernel-debuginfo-3.10.0-693.2.2.el7.x86_64 available.
Error: Nothing to do
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Could not find debuginfo for main pkg: kernel-3.10.0-693.2.2.el7.x86_64
No debuginfo packages available to install
package kernel-devel-3.10.0-693.2.2.el7.x86_64 is not installed
package kernel-debuginfo-3.10.0-693.2.2.el7.x86_64 is not installed
problem installing rpm(s) kernel-devel-3.10.0-693.2.2.el7.x86_64 kernel-debuginfo-3.10.0-693.2.2.el7.x86_64

运行stap-prep的时候,它探测出还要安装kernel-devel-3.10.0-693.2.2.el7.x86_64包和kernel-debuginfo-3.10.0-693.2.2.el7.x86_64包 (实际上还有kernel-debuginfo-common包),但是自动安装失败。我们可以按照如下方法手动安装。

手动安装必要的内核信息包

SystemTap需要安装内核内核符号文件来probe内核。必要的内核信息包含在如下三个包中:

  • kernel-debuginfo
  • kernel-debuginfo-common
  • kernel-devel

一定要安装与当前内核版本一致的包。当前环境的内核版本是3.10.0-693.2.2.el7.x86_64,所以需要安装的包为:

  • kernel-debuginfo-3.10.0-693.2.2.el7.x86_64
  • kernel-debuginfo-common-3.10.0-693.2.2.el7.x86_64
  • kernel-devel-3.10.0-693.2.2.el7.x86_64

注意:其实在上一步运行stap-prep时,已经把需要的包的名称及其内核精准地打印在屏幕上了。

 

接下来安装这三个包,注意不要直接yum install kernel-debuginfo kernel-debuginfo-common kernel-devel, 即使能找到相应的包,也是安装的最新版本,不会自动匹配当前版本。所以我们下载RPM包,再用rpm命令依次安装。

 

对于CentOS来说,内核符号文件一版在http://debuginfo.centos.org上有各个版本非常完整的包,但是一般从境内下载都比较慢,特别是kernel-debuginfo,比较大下载可能非常慢。所以在debuginfo.centos.org上下了kernel-debuginfo-common包,另外两个包在Google上搜了一把,分别找了两个镜像。下了之后才发现这个地方有坑,这个坑在后面展开讲。

wget https://ftp.sjtu.edu.cn/scientific/7/archive/debuginfo/kernel-debuginfo-3.10.0-693.2.2.el7.x86_64.rpm
wget http://debuginfo.centos.org/7/x86_64/kernel-debuginfo-common-x86_64-3.10.0-693.2.2.el7.x86_64.rpm
wget ftp://mirror.switch.ch/pool/4/mirror/scientificlinux/7.0/x86_64/updates/security/kernel-devel-3.10.0-693.2.2.el7.x86_64.rpm

下载之后,直接用rpm命令安装就好:

# rpm -ivh kernel-debuginfo-common-x86_64-3.10.0-693.2.2.el7.x86_64.rpm
# rpm -ivh kernel-debuginfo-3.10.0-693.2.2.el7.x86_64.rpm
# rpm -ivh kernel-devel-3.10.0-693.2.2.el7.x86_64.rpm

至此安装步骤完毕,下面来测试SystemTap能不能正常运行。

运行SystemTap

为了测试stap是否能正常运行,用如下简单命令打印:

# stap -e 'probe begin{printf("Hello, World"); exit();}'

运行失败…结果如下:

# stap -e 'probe begin{printf("Hello, World"); exit();}'
ERROR: module version mismatch (#1 SMP Tue Sep 12 10:10:26 CDT 2017 vs #1 SMP Tue Sep 12 22:26:13 UTC 2017), release 3.10.0-693.2.2.el7.x86_64
WARNING: /usr/bin/staprun exited with status: 1
Pass 5: run failed.  [man error::pass5]

错误信息是:”ERROR: module version mismatch (#1 SMP Tue Sep 1210:10:26 CDT 2017 vs #1 SMP Tue Sep 1222:26:13 UTC 2017)“。

解决”ERROR: module version mismatch”问题

stap运行的时候加上-v参数,打印更多信息看看还有没有更多线索:

# stap -e 'probe begin{printf("Hello, World"); exit();}' -v
Pass 1: parsed user script and 470 library scripts using 228224virt/41280res/3348shr/38020data kb, in 330usr/20sys/346real ms.
Pass 2: analyzed script: 1 probe, 1 function, 0 embeds, 0 globals using 229148virt/42332res/3536shr/38944data kb, in 0usr/0sys/6real ms.
Pass 3: using cached /root/.systemtap/cache/0b/stap_0bc9e27aef7a1de50ea41889a27fc524_1010.c
Pass 4: using cached /root/.systemtap/cache/0b/stap_0bc9e27aef7a1de50ea41889a27fc524_1010.ko
Pass 5: starting run.
ERROR: module version mismatch (#1 SMP Tue Sep 12 10:10:26 CDT 2017 vs #1 SMP Tue Sep 12 22:26:13 UTC 2017), release 3.10.0-693.2.2.el7.x86_64
WARNING: /usr/bin/staprun exited with status: 1
Pass 5: run completed in 0usr/10sys/38real ms.
Pass 5: run failed.  [man error::pass5]

查看c文件,vi /root/.systemtap/cache/0b/stap_0bc9e27aef7a1de50ea41889a27fc524_1010.c,搜错误信息”module version mismatch“,能搜到报错发生在下面的第13行,至于UTS_RELEASE和UTS_VERSION是在哪里设置的,直接Google一把。

#ifndef STP_NO_VERREL_CHECK
    const char* release = UTS_RELEASE;
    #ifdef STAPCONF_GENERATED_COMPILE
    const char* version = UTS_VERSION;
    #endif
    might_sleep();
    if (strcmp (release, “3.10.0-693.2.2.el7.x86_64”)) {
      _stp_error (“module release mismatch (%s vs %s)”, release, “3.10.0-693.2.2.el7.x86_64”);
      rc = -EINVAL;
    }
    #ifdef STAPCONF_GENERATED_COMPILE
    if (strcmp (utsname()->version, version)) {
      _stp_error (“module version mismatch (%s vs %s), release %s”, version, utsname()->version, release);
      rc = -EINVAL;
    }
    #endif
    #endif

有两篇文章里面提到了同样的坑,文章连接在底部的参考中。在kernel-devel包的所以文件中搜以下变量UTS_VERSION,

# rpm -ql kernel-devel | xargs grep UTS_VERSION
/usr/src/kernels/3.10.0-693.2.2.el7.x86_64/include/generated/compile.h:#define UTS_VERSION "#1 SMP Tue Sep 12 10:10:26 CDT 2017"

可以看到在compile.h中有#define UTS_VERSION “#1 SMP Tue Sep 12 10:10:26 CDT 2017”. 这个是不是很熟悉… 对比下上面运行stap的报错信息, module mismatch的时间就是这个。文件compile.h是自动生成的,可能和当时编译时的时间相关。但是stap要求这个也和当前系统uname -a里面的时间完全一直,如果下个CentOS原生的kernel-devel应该就没这个问题。

解决问题的另一个简单方法就是直接修改这个compile.h文件,原来的文件如下:

# cat /usr/src/kernels/3.10.0-693.2.2.el7.x86_64/include/generated/compile.h
/* This file is auto generated, version 1 */
/* SMP */
#define UTS_MACHINE "x86_64"
#define UTS_VERSION "#1 SMP Tue Sep 12 10:10:26 CDT 2017"
#define LINUX_COMPILE_BY "mockbuild"
#define LINUX_COMPILE_HOST "sl7-uefisign.fnal.gov"
#define LINUX_COMPILER "gcc version 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) "

修改define UTS_VERSION那一行,如下:

#define UTS_VERSION “#1 SMP Tue Sep 12 10:10:26 CDT 2017” -> #define UTS_VERSION “#1 SMP Tue Sep 12 22:26:13 UTC 2017”

再次运行stap:

# stap -e 'probe begin{printf("Hello, World"); exit();}' -v
Pass 1: parsed user script and 470 library scripts using 228220virt/41276res/3348shr/38016data kb, in 350usr/10sys/355real ms.
Pass 2: analyzed script: 1 probe, 1 function, 0 embeds, 0 globals using 229144virt/42328res/3536shr/38940data kb, in 0usr/0sys/6real ms.
Pass 3: using cached /root/.systemtap/cache/0b/stap_0bc9e27aef7a1de50ea41889a27fc524_1010.c
Pass 4: using cached /root/.systemtap/cache/0b/stap_0bc9e27aef7a1de50ea41889a27fc524_1010.ko
Pass 5: starting run.
ERROR: module version mismatch (#1 SMP Tue Sep 12 10:10:26 CDT 2017 vs #1 SMP Tue Sep 12 22:26:13 UTC 2017), release 3.10.0-693.2.2.el7.x86_64
WARNING: /usr/bin/staprun exited with status: 1
Pass 5: run completed in 0usr/10sys/38real ms.
Pass 5: run failed.  [man error::pass5]

因为中间生成的C文件和ko模块都是用的cache (蓝色标注的部分),我们把上面的cache文件删除,再重新运行,这次可以成功了。

# stap -e 'probe begin{printf("Hello, World"); exit();}'
Hello, World

参考

https://sourceware.org/systemtap/SystemTap_Beginners_Guide/using-systemtap.html#using-setup

ERROR: module version mismatch

https://groups.google.com/forum/#!topic/openresty/nlEc3qlDyOc

本文永久更新链接地址:https://www.linuxidc.com/Linux/2019-03/157818.htm

赞(0) 打赏
转载请注明出处:服务器评测 » CentOS 7上Systemtap的安装
分享到: 更多 (0)

听说打赏我的人,都进福布斯排行榜啦!

支付宝扫一扫打赏

微信扫一扫打赏